Length Reduction: Reduce the length of your buffer tube by over 5". The 2.55" MCS Buffer Tube is the shortest for the AR-15 & AR-9 platform.
RIFLE CALIBER SYSTEM WEIGHTS- WITHOUT BCG= 7.4oz. DFA BOLT CARRIER GROUP W/ CYCLE SYSTEM= 17oz.9MM SYSTEM WEIGHTS- WITHOUT BCG= 8.1oz. DFA BOLT CARRIER GROUP W/ CYCLE SYSTEM= 19oz.
Compatible with most Rifle Caliber AR-15 pistols and rifles in calibers of: .223, .223Wylde, 5.56, 300 BO, 7.62×39, 6.8 SPC, 6.5 Grendel, .458 SOCOM, 50 Beowulf. For CMMG Radial Delay you will need to order the Rifle Caliber version.
Compatible with Most 9mm AR-15 pistols and rifles: For CMMG Radial Delay you will need to order the Rifle Caliber version.
Dead Foot Arms MCS AR-Pistol Kit is our complete short tube conversion kit. It includes: Buffer Tube and End Cap Assembly, MCS Bolt Carrier Group with black nitride finish, end plate with QD port, plunger, and recoil/plunger springs. (Rubber Bumper & Spring Cap for 9mm)
NOTE- This product does not include the the folding stock adaptor. However, the user can later add the MCS folding adaptor to this system by ordering our Pistol Kit to MCS Folder conversion kit.
***
White Label Armory Rifle Caliber BCG
The Modified Cycle System MILSPEC Complete Bolt Carrier Group is a shortened version of the MILSPEC M16A2 Full-Auto BCG
BCG weight- 9.2 oz. BCG length- 5.3"
Intended for use with the Dead Foot Arms Modified Cycle System®
- M16 Style Carrier
- Machined from 8620 Steel
- Heat Treated
- Final Grind Before Plating
- Blacknitride+™ by H&M
- 56/.223 Bolt
- Machined from 9310 Steel
- Heat Treated
- Shot Peened
- MPI
- Blacknitride+™ by H&M
- Cam Pin
- Machined from 4140 Steel
- Heat Treated
- Blacknitride+™ by H&M
- Firing Pin
- Machined from 8640 Steel
- Blacknitride+™ by H&M
- 100% American Made
Bootleg BCG
- Complete bolt carrier group.
- Machined from S7 Tool Steel
- Lithium Isonite Coating
- 4 Setting Adjustable Vent System relieves excess gas pressure created from suppressor use creating longer dwell time and less blowback to the shooter
- Gas Adjustment can be turned while installed in the rifle
- Uses all standard MIL-SPEC components
- Staked MIL-SPEC Gas Key
- Adjustment Pin is easily removed for cleaning
- Full Auto Rated
- This is only recommended to be used for 5.56, .223. 300blkout
- It has been modified to fit the Dead Foot Arms MCS system and will only work in 2.5 kits
